[swift-evolution] [Draft] Rename Sequence.elementsEqual
Jonathan Hull
jhull at gbis.com
Fri Oct 13 15:06:21 CDT 2017
It has been a while, but I believe a lexicographical ordering is basically a mapping from a set to the natural numbers (which should, in effect, provide a total ordering). The mapping itself can be arbitrary, but the same set of things should never map to two different sequences (which just happens to be the example given).
This tells me that “lexicographicallyPrecedes” is actually misnamed unless it refers to something which has a defined totally ordering.
If we are looking to rename elementsEqual (which I would expect to check if the same elements are present regardless of ordering), I would recommend elementOrderingEqual or something like that that references that the answer will be affected by the internal representation/ordering of the sequence.
Thanks,
Jon
> On Oct 13, 2017, at 11:10 AM, Jarod Long via swift-evolution <swift-evolution at swift.org> wrote:
>
> The name that feels natural to me would be `sequentiallyEquals`. I don't dispute that the term "lexicographical" is used correctly here, although at least for me personally, it's not a word that I encounter frequently enough to understand what this method would do without reading the documentation. Like Kevin, if I were to guess what the method did without checking, I would probably think that it compared lexicographically-sorted versions of the collections.
>
> But the consistency with `lexicographicallyPrecedes` is a pretty strong argument, although `sequentiallyPrecedes` would also feel more natural to me there, and my suspicion about the mentioned lack of evidence that the method has been a pitfall for users is that it's not actually used often enough out in the wild to have heard much about it. That's just a guess though. This proposal is the first time I've learned of its existence.
>
> In any case, my ideal version of this proposal would use `sequentiallyEquals` and also rename `lexicographicallyPrecedes` to `sequentiallyPrecedes`, but I still like the proposal overall as-is. Thanks for bringing it forward!
>
> Jarod
>
> On Oct 12, 2017, 16:24 -0700, Xiaodi Wu via swift-evolution <swift-evolution at swift.org>, wrote:
>> Rename Sequence.elementsEqual
>>
>> Proposal: SE-NNNN <https://gist.github.com/xwu/NNNN-rename-elements-equal.md>
>> Authors: Xiaodi Wu <https://github.com/xwu>
>> Review Manager: TBD
>> Status: Awaiting review
>> <https://gist.github.com/xwu/1f0ef4e18a7f321f22ca65a2f56772f6#introduction>Introduction
>>
>> The current behavior of Sequence.elementsEqual is potentially confusing to users given its name. Having surveyed the alternative solutions to this problem, it is proposed that the method be renamed to Sequence.lexicographicallyEquals.
>>
>> <https://gist.github.com/xwu/1f0ef4e18a7f321f22ca65a2f56772f6#motivation>Motivation
>>
>> As outlined by Ole Begemann <https://twitter.com/olebegemann/status/916291785185529857>, use of Sequence.elementsEqual(_:) can lead to surprising results if the sequences compared are unordered:
>>
>> var set1: Set<Int> = Set(1...5)
>> var set2: Set<Int> = Set((1...5).reversed())
>>
>> set1 == set2 // true
>> set1.elementsEqual(set2) // false
>> This result does reflect the intended and documented behavior of the elementsEqual(_:) method, which performs a lexicographical elementwise comparison. That is, the method first compares set1.first to set2.first, then (if the two elements compare equal) compares the next element stored internally in set1 to the next element stored internally in set2, and so on.
>>
>> In almost all circumstances where a set is compared to another set, or a dictionary is compared to another dictionary, users should use == instead of elementsEqual(_:).
>>
>> <https://gist.github.com/xwu/1f0ef4e18a7f321f22ca65a2f56772f6#proposed-solution>Proposed solution
>>
>> The proposed solution is the result of an iterative process of reasoning, presented here:
>>
>> The first and most obvious solution is to remove the elementsEqual(_:) method altogether in favor of ==. This prevents its misuse. However, because elementsEqual(_:) is a generic method on Sequence, we can use it to compare an instance of UnsafeBufferPointer<Int> to an instance of [Int]. This is a useful and non-redundant feature which would be eliminated if the method is removed altogether.
>>
>> A second solution <https://github.com/apple/swift/pull/12318> is to create overloads that forbid the use of the elementsEqual(_:) method specifically in non-generic code. This would prevent misuse in non-generic code; however, it would also forbid legitimate mixed-type comparisons in non-generic code while failing to prevent misuse in generic code. The solution also creates a difference in the behavior of generic and non-generic code calling the same method, which is potentially confusing, without solving the problem completely.
>>
>> A third solution is to dramatically overhaul the protocol hierarchy for Swift sequences and collections so that unordered collections no longer have members such as first and elementsEqual(_:). However, this would be a colossal and source-breaking undertaking, and it is unlikely to be satisfactory in addressing all the axes of differences among sequence and collection types:
>>
>> Finite versus infinite
>> Single-pass versus multi-pass
>> Ordered versus unordered
>> Lazy versus eager
>> Forward/bidirectional/random-access
>> A fourth solution is proposed here. It is predicated on the following observation:
>>
>> Another method similar to elementsEqual(_:) already exists on Sequence named lexicographicallyPrecedes(_:). Like first, elementsEqual(_:), drop(while:), and others, it relies on the internal order of elements in a manner that is not completely suitable for an unordered collection. However, like first and unlike elementsEqual(_:), this fact is called out in the name of the method; unsurprisingly, like first and unlike elementsEqual(_:), there is no evidence that lexicographicallyPrecedes(_:) has been a pitfall for users.
>>
>> This observation suggests that a major reason for confusion over elementsEqual(_:) stems from its name. So, it is proposed that elementsEqual(_:) should be renamed to lexicographicallyEquals(_:). The function will remain somewhat of a poor fit for unordered collections, but no more so than many other methods that cannot trivially be removed from the API of unordered collections (as discussed above). The key is that, with such a renaming, the behavior of this method will no longer be confusing.
>>
>> <https://gist.github.com/xwu/1f0ef4e18a7f321f22ca65a2f56772f6#detailed-design>Detailed design
>>
>> extension Sequence where Element : Equatable {
>> @available(*, deprecated, message: "Use '==' if possible to compare two sequences of the same type, or use 'lexicographicallyEquals' to compare two ordered sequences.")
>> public func elementsEqual<Other : Sequence>(
>> _ other: Other
>> ) -> Bool where Other.Element == Element {
>> return lexicographicallyEquals(other)
>> }
>>
>> public func lexicographicallyEquals<Other : Sequence>(
>> _ other: Other
>> ) -> Bool where Other.Element == Element {
>> // The body of this method is unchanged.
>> var iter1 = self.makeIterator()
>> var iter2 = other.makeIterator()
>> while true {
>> switch (iter1.next(), iter2.next()) {
>> case let (e1?, e2?):
>> if e1 != e2 { return false }
>> case (_?, nil), (nil, _?):
>> return false
>> case (nil, nil):
>> return true
>> }
>> }
>> }
>> }
>> A parallel change will be made with respect to elementsEqual(_:by:); that is, it will be deprecated in favor of lexicographicallyEquals(_:by:).
>>
>> <https://gist.github.com/xwu/1f0ef4e18a7f321f22ca65a2f56772f6#source-compatibility>Source compatibility
>>
>> Existing code that uses elementsEqual will gain a deprecation warning.
>>
>> <https://gist.github.com/xwu/1f0ef4e18a7f321f22ca65a2f56772f6#effect-on-abi-stability>Effect on ABI stability
>>
>> None.
>>
>> <https://gist.github.com/xwu/1f0ef4e18a7f321f22ca65a2f56772f6#effect-on-api-resilience>Effect on API resilience
>>
>> This proposal adds new methods to the public API of Sequence and conforming types.
>>
>> <https://gist.github.com/xwu/1f0ef4e18a7f321f22ca65a2f56772f6#alternatives-considered>Alternatives considered
>>
>> It is to be noted that lexicographicallyPrecedes(_:by:) and elementsEqual(_:by:) are essentially the same method, since both perform a lexicographical comparison using a custom predicate. However, there is not a good unifying name. (lexicographicallyCompares(to:by:) reads poorly.) Moreover, the predicate supplied is intended to have very different semantics, and maintaining two distinct methods may be a superior fit with the typical user's mental model of the intended behavior and may also be clearer to readers of the code. Therefore, this proposal does not seek to unify the two methods; instead, elementsEqual(_:by:) will be renamed lexicographicallyEquals(_:by:) as detailed above.
>>
>> _______________________________________________
>> swift-evolution mailing list
>> swift-evolution at swift.org
>> https://lists.swift.org/mailman/listinfo/swift-evolution
> _______________________________________________
> swift-evolution mailing list
> swift-evolution at swift.org
> https://lists.swift.org/mailman/listinfo/swift-evolution
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.swift.org/pipermail/swift-evolution/attachments/20171013/58ff7f29/attachment.html>
More information about the swift-evolution
mailing list