[swift-evolution] Proposal: Split extensions into implementing methods and adding static functions Was: [swift-evolution-announce] [Review] SE-0164: Remove final support in protocol extensions
Xiaodi Wu
xiaodi.wu at gmail.com
Tue May 2 03:33:42 CDT 2017
I'm sorry, it's been a while. What is the harm that you are trying to cure,
and how does this design accomplish that task?
What you call "unexpected" is intentional. Many protocols, including the
revised integer protocols that were just approved, distinguish between
protocol requirements for which default implementations are provided and
protocol extension methods which can be shadowed but not overridden. Both
are used, and deliberately. Are you proposing to remove this feature? That
simply cannot be done, as it would require re-designing vast amounts of the
standard library that were just re-designed.
On Tue, May 2, 2017 at 02:54 Howard Lovatt <howard.lovatt at gmail.com> wrote:
> I haven't replied to these messages for a while since it has taken some
> time to formulate a proposal that incorporates the feedback give - thanks
> for the feedback.
>
> The new proposal allows retroactively added protocols to be exported and
> ad-hoc code reuse, the two areas of concern.
>
> Comments?
>
>
> =================================================================================
>
> # Proposal: Split extension into implementing methods and adding methods
> and protocols retrospectively
>
> ## Revision history
>
> | Version | Date | Comment |
> |---------|--------------|--------------|
> | Draft 1 | 11 April 2017 | Initial version |
> | Draft 2 | 13 April 2017 | Added support for post-hoc conformance to a
> protocol - replaced static final extensions with final extensions |
> | Draft 3 | 17 April 2017 | Added justification section |
> | Draft 4 | 2 May 2017 | Allow final extensions to be public and allow
> ad-hoc code reuse |
>
> ## Introduction
>
> Currently extension methods are confusing because they have different
> dispatch rules for the same calling syntax. EG:
>
> public protocol P {
> func mP() -> String
> }
> extension P {
> func mP() -> String { return "P.mP" }
> func mE() -> String { return "P.mE" }
> }
> struct S: P {
> func mP() -> String { return "S.mP" }
> func mE() -> String { return "S.mE" }
> }
> let s = S()
> s.mP() // S.mP as expected
> s.mE() // S.mE as expected
> let p: P = s // Note: s now typed as P
> p.mP() // S.mP as expected
> p.mE() // P.mE unexpected!
>
> The situation with classes is even more confusing:
>
> class C: P { /*gets the protocol extensions*/ }
> let pC: P = C()
> pC.mP() // P.mP as expected!
> pC.mE() // P.mE as expected!
> class D: C {
> /*override not allowed!*/ func mP() -> String { return "D.mP" }
> /*override not allowed!*/ func mE() -> String { return "D.mE" }
> }
> let pD: P = D()
> pD.mP() // P.mP unexpected!
> pD.mE() // P.mE unexpected!
>
> This proposal cures the above two problem by separating extension methods
> into two seperate use cases: implementations for methods and adding methods
> and protocols retrospectively. The proposal still retains retroactively
> adding protocol conformance and ad-hoc code reuse, however these are made
> easy to understand and safe.
>
> ## Implementing methods in same file as type declaration
>
> If the extension is in the **same** file as the type declaration then its
> implemented methods are dispatched using a Vtable for protocols and classes
> and statically for structs and enums. EG:
>
> File P.swift
>
> protocol P {
> // func m() not declared in type since it is added by the
> extension, under this proposal it is an error to include a declaration in a
> type **and** in an extension
> }
> extension P {
> func m() { print("P.m") } // m is added to the protocol declaration
> }
>
> Same or another file
>
> struct S: P {
> override func m() { print("S.m") } // Note override required
> because m already has an implementation from the extension
> }
> let p: P = S() // Note typed as P
> p.m() // Now prints S.m as expected
>
> Extensions in the same file as the declaration can have any access, can be
> final, and can have where clauses and provide inheritable implementations.
> Ad-hoc code reuse is supported, in particular if a class/enum/strict
> already had a method, m say, and a protocol, P say, required an m then an
> extension that added P would not need to provide m (i.e. as at present).
>
> In a protocol at present you can declare a method that is then implemented
> in an extension without the use of the override keyword. This situation
> only applies to protocols, for structs/enumerated/classes you cannot
> declare in type and implement in an extension at all. This proposal unifies
> the behaviour of protocol/struct/enum/class with extensions and also
> prevents the error of a minor typo between the protocol and extension
> adding two methods instead of generating an error, by requiring either:
>
> 1. The method is only declared in the protocol and not in any extensions
> and is therefore abstract
> 2. The method is only in one extension and not in the protocol
>
> A method can be abstract in one protocol and implemented in a second
> protocol that extends the first.
>
> The implementation needed to achieve this proposal for a protocol is that
> a value instance typed as a protocol is copied onto the heap, a pointer to
> its Vtable added, and its address passed/copied (i.e. it becomes a class
> instance). No change is needed for a class instance typed as a protocol,
> which unlike at present can now be passed/copied as a protocol directly.
> Think of a protocol as like an abstract class; cannot be instantiated like
> an abstract class and which possibly has abstract methods, but in different
> in that it cannot have fields but can be multiply inherited.
>
> Static and final methods implemented in extensions are not part of the
> Vtable and are statically dispatched, i.e. no change from current Swift for
> static but final now has the expected meaning for a protocol. Dispatching
> for structs and classes unchanged.
>
> ## Retrospectively adding protocols and methods
>
> A new type of extension is proposed, a `final extension`, which can be
> either in or outside the file in which the protocol/struct/enum/class
> declaration is in:
>
> File P.swift
>
> protocol P {}
> extension P {
> func m() { print("P.m") } // m is added to the protocol declaration
> }
>
> Same or another file
>
> struct S: P {} // Inherits m from the extension
>
> In file P2.swift
>
> protocol P2 {
> func m2()
> func m() // Note same signature as P.m which S already implements
> }
>
> In same or another file
>
> final extension S: P2 { // Note extension marked final
> // m cannot be provided because S already has a final m (the
> inherited method must be final)
> func m2() { print("SP2.m2") } // Implicitly final, completes
> implementation of P2
> func mE() { print("SP2.mE") } // Implicitly final, not an existing
> method
> }
>
> Which are called as any other method would be called:
>
> let s = S() // or S() as P2 or s: P2
> s.m() // Prints S.m
> s.m2() // Prints SP2.m2
> s.mE() // Prints SP2.mE
>
> Notes:
>
> 1. A method added by a `final extension`, e.g. `mE`, is implicitly final
> (as the name would suggest).
>
> 2. If the `final extension` adds a method, e.g. `mE`, that method cannot
> already exist. IE a `final extension` cannot override an existing method or
> implement a protocol declared method that lacks an implementation (unless
> it also adds the protocol). This is retroactively adding a method. Also see
> next point.
>
> 3. If the `final extension` adds a protocol, e.g. `P2`, then it must
> implement all the methods in that protocol that are not implemented, e.g.
> `m2`. This is retroactively adding protocol conformance. Also see next
> point.
>
> 4. If the `final extension` adds a protocol, e.g. `P2`, then it inherits
> all the methods in that protocol that are implemented, e.g. `m`. These
> inherited methods must be final. This is ad-hoc code reuse of final methods
> when retroactively adding protocol conformance.
>
> Final-extensions can have `where` clauses.
>
> The implementation for a `final extension` is always static dispatching.
> That is why all methods involved in a `final extension` are final. The
> compiler always knows that the method can be called statically and there is
> no need for a Vtable entry for any of the methods, it is as though the
> methods were declared static but with the more convenient syntax of a
> normal method.
>
> ## Justification
>
> The aim of Swift is nothing more than dominating the world. Using the
> current, April 2017, https://www.tiobe.com/tiobe-index/ index of job
> adverts for programmers the languages that are in demand are: Java 15.568%,
> C 6.966%, C++ 4.554%, C# 3.579%, Python 3.457%, PHP 3.376%, Visual Basic
> .NET 3.251%, JavaScript 2.851%, Delphi/Object Pascal 2.816%, Perl 2.413%,
> Ruby 2.310%, and Swift 2.287%. So Swift at 12th is doing very well for a
> new language and is already above Objective-C at 14th. However there is
> obviously a long way to go and the purpose of this proposal is to help with
> this climb.
>
> A characteristic of many of the languages above Swift in the Tiobe Index
> is that they have major third party libraries; for some languages they are
> almost defined by their third part libraries, e.g. Ruby for Rails. A major
> part of this proposal is to make extensions safe when using multiple
> libraries from different venders. In particular, the two forms of
> extensions in this proposal can safely be exported.
>
> As part of Swift's goal of world domination is that it is meant to be easy
> to learn by a process of "successive disclosure". The current inconsistent
> behaviour of protocols and extensions hinders this process and is a common
> gotcha for newbies. This proposal eliminates that problem also.
>
> Extensions are not new in languages, they are part of the .NET languages
> for example. Since .NET popularised extensions they have been discussed by
> other language communities, particularly Java and Scala, and in the
> academic community (normally termed the Expression Problem) however they
> have not proved popular because of the problems they cause. Nearly all
> languages have a strong bias towards keeping the language small and simple
> and trade of the advantages of a feature against the disadvantages. The
> feature only makes it into the language if it offers many advantages, has
> few disadvantages, and is not heavily overlapping with other features. It
> is this keeping it small and simple test that extensions have failed in
> other languages, in particular their behaviour is hard to predict in a
> large code base with multiple third party libraries.
>
> However, extensions are popular in Swift and this proposals makes a few
> changes to them to make their behaviour predictable both in terms of third
> party libraries and in terms of method dispatch when the variable is typed
> as a protocol. Thereby still providing extensions including retroactive
> conformance and ad-hoc code reuse, but without the problems.
>
> ## Possible future work (not part of this proposal)
>
> This proposal will naturally allow bodies to be added to protocols
> directly rather than via an extension, since under the proposal the
> extension adds the declaration to the type so it is a small step to allow
> the protocol methods to have an implementation.
>
> In an opposite sense to the above adding bodies to protocols, extensions
> could be allowed to add method declarations without bodies to protocols.
>
> The two above future work proposals, if both added, would add symmetry to
> where declarations and bodies may appear for protocols.
>
> ## In summary
>
> The proposal formalises the split use of extensions into their two uses:
> implementing methods and retroactively adding protocols and methods (in
> both cases including ad-hoc code reuse). The purpose of this split is to
> eliminate the problems associated with exceptions that have been well
> documented both with respect to Swift and other languages. Syntax is added
> that clarifies their two use cases (implementing methods and retroactively
> adding):
>
> 1. The former are termed extensions and must be in the same file as the
> type is declared, but can have non-final or final methods.
> 2. The latter are termed final-extensions and can be in any file,
> however final-extensions only have final methods.
>
> Note the distinction between an extension in the same file and in a
> separate file is consistent with the philosophy that there is special
> status to the same file as proposed for private in <
> http://github.com/apple/swift-evolution/blob/master/proposals/0169-improve-interaction-between-private-declarations-and-extensions.md
> >.
>
>
> =================================================================================
>
> On Sun, 23 Apr 2017 at 6:36 am, Thorsten Seitz <tseitz42 at icloud.com>
> wrote:
>
>> +1
>>
>> Extensions are a great feature and I’m really glad that Swift has them.
>> Conflicts should be handled by improving import and disambiguation features
>> like Xiaodi says which is useful for other cases as well.
>>
>> -Thorsten
>>
>>
>> Am 18.04.2017 um 03:47 schrieb Xiaodi Wu via swift-evolution <
>> swift-evolution at swift.org>:
>>
>> Simple: you put the user code that needs the more accurate library in one
>> file and import only the more accurate library there, and you put the user
>> code that needs the more performant library in a separate file and import
>> only the more performant library there! Swift's devotion to file-based
>> organization presents endless avenues of flexibility!
>>
>> What you write is an argument for designing a more expressive import
>> and/or disambiguation feature, not for disallowing public retroactive
>> conformance. A proposal to rip out entirely the ability to vend public APIs
>> with extensions is simply not going to fly. The core team has committed to
>> a small standard library and multiple independent core libraries like
>> Foundation. This can only work because Foundation can greatly expand the
>> API of standard library types through extensions.
>>
>> Your proposal would undo that design decision and require folding
>> Foundation's functionality into the standard library, or rewriting the
>> entire Foundation overlay to encapsulate standard library types instead of
>> extending them. For example, NSString would have to be a separate type that
>> encapsulates String. Yet oodles of work have gone into making NSString
>> seamlessly bridge to String in the first place.
>> On Mon, Apr 17, 2017 at 20:05 Howard Lovatt <howard.lovatt at gmail.com>
>> wrote:
>>
>>> Comments in-line below
>>>
>>> -- Howard.
>>>
>>> On 17 Apr 2017, at 9:01 am, Xiaodi Wu <xiaodi.wu at gmail.com> wrote:
>>>
>>> This continues to forbid use cases that are critical.
>>>
>>>
>>> I think "critical" is overstating the importance. Plenty of successful
>>> languages do not have extensions. Extensions have been discussed and
>>> rejected by successful languages. The .NET guidelines suggest considered
>>> cautious use. I have tried to encapsulate the best practice into a language
>>> feature.
>>>
>>>
>>> For instance, I am writing a library that vends additional conformances
>>> for Float and Double. Any numerics library would need to do the same.
>>>
>>>
>>> You need to consider this carefully because your numerics library might
>>> add a method sinh for example and the user of your library might be using
>>> other numerical libraries as well, one of these others might also provide
>>> sinh. Which is to be called in the user code by f.sinh? Suppose one library
>>> emphasises speed over accuracy and the other vice versa. You really want
>>> access to both versions in the user code. This is a situation I have come
>>> across a few times in numeric C, Java, and C++ with matrix libraries where
>>> code I have worked on has used multiple libraries in the same application
>>> for good reason.
>>>
>>> I think you would be better vending functions for things like sinh,
>>> rather than extending float with an additional function, and vending types
>>> for more complex things like matrices, rather than extending arrays with
>>> dot products for example. If you vend a type you can easily give access to
>>> the underlying type using composition rather than extension or inheritance,
>>> there is an example of this in the proposal just above the Justification
>>> section..
>>>
>>>
>>> Your design would eliminate all such libraries, which is a non-starter.
>>> I am not sure what defects you are trying to solve with this proposal.
>>>
>>> I am trying to make Swift more consistent, easier to learn, and to
>>> encourage third-party libraries.
>>>
>>>
>>> On Sun, Apr 16, 2017 at 17:51 Howard Lovatt <howard.lovatt at gmail.com>
>>> wrote:
>>>
>>>> @Brent,
>>>>
>>>> I have updated the proposal to address your concerns, in particular I
>>>> don't see that retrospectively adding methods and protocols has been
>>>> removed it has just had its ugly corners rounded. See revised proposal
>>>> below particularly the end of section "Retrospectively adding
>>>> protocols and methods" and new section "Justification".
>>>>
>>>> Hope this convinces you that the change is worthwhile.
>>>>
>>>> -- Howard.
>>>>
>>>> ====================================
>>>>
>>>> # Proposal: Split extension usage up into implementing methods and
>>>> adding methods and protocols retrospectively
>>>>
>>>> ## Revision history
>>>> | Version | Date | Comment |
>>>> |---------|--------------|--------------|
>>>> | Draft 1 | 11 April 2017 | Initial version |
>>>> | Draft 2 | 13 April 2017 | Added support for post-hoc conformance to
>>>> a protocol - replaced static final extensions with final extensions |
>>>> | Draft 3 | 17 April 2017 | Added justification section |
>>>>
>>>> ## Introduction
>>>>
>>>> Currently extension methods are confusing because they have different
>>>> dispatch rules for the same calling syntax. EG:
>>>>
>>>> public protocol P {
>>>> func mP() -> String
>>>> }
>>>> extension P {
>>>> func mP() -> String { return "P.mP" }
>>>> func mE() -> String { return "P.mE" }
>>>> }
>>>> struct S: P {
>>>> func mP() -> String { return "S.mP" }
>>>> func mE() -> String { return "S.mE" }
>>>> }
>>>> let s = S()
>>>> s.mP() // S.mP as expected
>>>> s.mE() // S.mE as expected
>>>> let p: P = s // Note: s now typed as P
>>>> p.mP() // S.mP as expected
>>>> p.mE() // P.mE unexpected!
>>>>
>>>> Extension methods can also cause compatibility problems between
>>>> modules, consider:
>>>>
>>>> In Module A
>>>> extension Int: P {
>>>> func m() -> String { print("A.m") }
>>>> }
>>>>
>>>> In Module B
>>>> extension Int: P {
>>>> func m() -> String { print("B.m") }
>>>> }
>>>>
>>>> In Module C
>>>> import A
>>>> import B // Should this be an error
>>>> let i = 0
>>>> i.m() // Should it return A.m or B.m?
>>>>
>>>> This proposal cures the above two problems by separating extension
>>>> methods into two seperate use cases: implementations for methods and adding
>>>> methods and protocols retrospectively.
>>>>
>>>> ## Implementing methods
>>>>
>>>> If the extension is in the same file as the protocol/struct/enum/class
>>>> declaration then it implements the methods and is dispatched using a
>>>> Vtable. EG:
>>>>
>>>> File P.swift
>>>> protocol/struct/enum/class P {
>>>> // func m() not declared in type since it is added by the
>>>> extension, under this proposal it is an error to include a declaration in a
>>>> type *and* in an extension
>>>> }
>>>> extension P {
>>>> func m() { print("P.m") } // m is added to the
>>>> protocol/struct/enum/class declaration
>>>> }
>>>>
>>>> Same or other file
>>>> struct S: P {
>>>> override func m() { print("S.m") } // Note override required
>>>> because m already has an implementation from the extension
>>>> }
>>>> let p: P = S() // Note typed as P
>>>> p.m() // Now prints S.m as expected
>>>>
>>>> Extensions in the same file as the declaration can have any access, can
>>>> be final, and can have where clauses and provide inheritable
>>>> implementations.
>>>>
>>>> In a protocol at present there is a difference in behaviour between a
>>>> protocol that declares a method that is then implemented in an extension
>>>> and a protocol that just has the method implemented in an extension and no
>>>> declaration. This situation only applies to protocols, for
>>>> structs/enumerated/classes you cannot declare in type and implement in
>>>> extensions. The proposal unifies the behaviour of
>>>> protocol/struct/enum/class with extensions and prevents the error of a
>>>> minor typo between the protocol and extension adding two methods instead of
>>>> generating an error.
>>>>
>>>> The implementation needed to achieve this proposal is that a value
>>>> instance typed as a protocol is copied onto the heap, a pointer to its
>>>> Vtable added, and it is passed as a pointer. IE it becomes a class
>>>> instance. No change needed for a class instance typed as a protocol.
>>>>
>>>> ## Retrospectively adding protocols and methods
>>>>
>>>> A new type of extension is proposed, a "final extension", which can be
>>>> either in or outside the file in which the protocol/struct/enum/class
>>>> declaration is in. EG:
>>>>
>>>> protocol P2 {
>>>> func m2P()
>>>> }
>>>> final extension S: P2 { // Note extension marked final
>>>> func m2P() { print("SP2.m2P") } // Implicitly final, completely
>>>> implements P2
>>>> func m2E() { print("SP2.m2E") } // Implicitly final, not an
>>>> existing method
>>>> }
>>>>
>>>> Which are called as any other method would be called:
>>>>
>>>> let s = S()
>>>> s.m2P() // Prints SP2.m2P
>>>> s.m2E() // Prints SP2.m2E
>>>>
>>>> A method added by a final extension is is implicitly final, as the name
>>>> would suggest, and cannot be overridden.
>>>>
>>>> Notes:
>>>>
>>>> 1. If the final extension adds a method, e.g. m2E, that method cannot
>>>> already exist. IE a final extension cannot override an existing method or
>>>> implement a protocol declared method that lacks an implementation unless it
>>>> also adds the protocol.
>>>>
>>>> 2. If the final extension adds a protocol then it must implement all
>>>> the methods in that protocol that are not currently implemented.
>>>>
>>>> 3. If the final extension is outside of the file in which the
>>>> protocol/struct/enum/class declaration is in then the extension and the
>>>> methods can only have fileprivate or internal access. This prevents
>>>> retrospective extensions from numerous modules clashing, since they are not
>>>> exported outside of the module.
>>>>
>>>> When a type is extended inside a module with a final extension the
>>>> extension is not exported. For example:
>>>>
>>>> final extension Int: P2 {
>>>> func m2P() { print("Int.m2P") }
>>>> }
>>>>
>>>> If an exported function uses Int, e.g.:
>>>>
>>>> public func f(_ x: Int) -> Int {
>>>> x.m2P()
>>>> return x
>>>> }
>>>>
>>>> Then when used in an external module both the input Int and the output
>>>> Int are not extended with P2. However as the Int goes into f it gains P2
>>>> conformance and when it leaves it looses P2 conformance. Thus inside and
>>>> outside the module the behaviour is easily understood and consistent and
>>>> doesn't clash with other final extensions in other modules.
>>>>
>>>> Taking the above example further an Int with P2 conformance is required
>>>> by the user of a library; then it can simply and safely be provided, e.g.:
>>>>
>>>> public class P2Int: P2 {
>>>> var value = 0
>>>> func m2P() { print("Int.m2P") }
>>>> }
>>>>
>>>> This type, P2Int, is easy to write, one line longer than a final
>>>> extension, and can easily be used as both a P2 and an Int and does not
>>>> clash with another Int extension from another module.
>>>>
>>>> ## Justification
>>>>
>>>> The aim of Swift is nothing more than dominating the world. Using the
>>>> current, April 2017, https://www.tiobe.com/tiobe-index/ index of job
>>>> adverts for programmers the languages that are in demand are: Java 15.568%,
>>>> C 6.966%, C++ 4.554%, C# 3.579%, Python 3.457%, PHP 3.376%, Visual Basic
>>>> .NET 3.251%, JavaScript 2.851%, Delphi/Object Pascal 2.816%, Perl 2.413%,
>>>> Ruby 2.310%, and Swift 2.287%. So Swift at 12th is doing very well for a
>>>> new language and is already above Objective-C at 14th. However there is
>>>> obviously a long way to go and the purpose of this proposal is to help with
>>>> this climb.
>>>>
>>>> A characteristic of many of the languages above Swift in the Tiobe
>>>> Index is that they have major third party libraries; for some languages
>>>> they are almost defined by their third part libraries, e.g. Ruby for Rails.
>>>> A major part of this proposal is to make extensions safe when using
>>>> multiple libraries from different venders. In particular final extensions
>>>> are not exported.
>>>>
>>>> As part of Swift's goal of world domination is that it is meant to be
>>>> easy to learn by a process of "successive disclosure". The current
>>>> inconsistent behaviour of protocols and extensions hinders this process and
>>>> is a common gotcha for newbies. This proposal eliminates that problem also.
>>>>
>>>> Extensions are not new in languages, they are part of the .NET
>>>> languages for example. Since .NET popularised extensions they have been
>>>> discussed by other language communities, particularly Java and Scala, and
>>>> in the academic community (normally termed the Expression Problem) however
>>>> they have not proved popular because of the problems they cause. Nearly all
>>>> languages have a strong bias towards keeping the language small and simple
>>>> and trade of the advantages of a feature against the disadvantages and the
>>>> feature only makes it into the language if it offers many advantages, has
>>>> few disadvantages, and is not heavily overlapping with other features. This
>>>> keeping it small and simple test is what extensions have failed in other
>>>> languages.
>>>>
>>>> Experience from .NET can however be used to improve extensions. There
>>>> is some excellent advice
>>>> https://blogs.msdn.microsoft.com/vbteam/2007/03/10/extension-methods-best-practices-extension-methods-part-6/
>>>> written by the VB .NET team when they added extensions to VB .NET. The
>>>> best-practice advice can be summarised by the following quotes from the
>>>> reference:
>>>>
>>>> 0. "In most real world applications these suggestions [the rest of
>>>> the suggestions] can (and quite frankly should!) be completely ignored."
>>>> This is an important observations, in your own code that is not intended
>>>> for reuse; go for it, use extensions. The proposal importantly still allows
>>>> this style of programming and in fact improves it by adding consistent
>>>> behaviour and syntax between protocols/structs/enumerated/classes.
>>>>
>>>> 1. "Read the .NET Framework Class Library Design Guidelines." The
>>>> equivalent for Swift is lacking at this stage. Probably because third party
>>>> libraries are rare.
>>>>
>>>> 2. "Be wary of extension methods." This recommendation is formalised
>>>> in the proposal by limiting final extensions to be fileprivate or internal.
>>>>
>>>> 3. "Put extension methods into their own namespace." This
>>>> recommendation is formalised in the proposal by limiting final extensions
>>>> to be fileprivate or internal.
>>>>
>>>> 4. "Think twice before extending types you don’t own."
>>>>
>>>> 5. "Prefer interface extensions over class extensions." Translation
>>>> to Swift terminology provide default implementations for protocol methods.
>>>> The proposal encourages this by eliminating a major gotcha with the current
>>>> implementation, namely the proposal always dispatches via a Vtable to give
>>>> consistent behaviour.
>>>>
>>>> 6. "Be as specific with the types you extend as possible."
>>>> Translation to Swift terminology provide default implementations for
>>>> protocol methods that extend other protocols if there is a more specific
>>>> behaviour that is relevent. The proposal encourages this by eliminating a
>>>> major gotcha with the current implementation, namely the proposal always
>>>> dispatches via a Vtable to give consistent behaviour.
>>>>
>>>> The proposal formalises these best practices from .NET whilst
>>>> increasing consistence and without loosing the ability to use extensions
>>>> heavily in your own one-off code to allow for rapid development. Most of
>>>> the best practices are for better libraries, particularly third party,
>>>> which is an important area for future Swift growth onto the server side.
>>>> This proposal actively encourages this transition to large formal server
>>>> side code without loosing the free wheeling nature of app code.
>>>>
>>>> ## Possible future work (not part of this proposal)
>>>>
>>>> This proposal will naturally allow bodies to be added to protocols
>>>> directly rather than via an extension, since under the proposal the
>>>> extension adds the declaration to the type so it is a small step to allow
>>>> the protocol methods to have an implementation.
>>>>
>>>> In an opposite sense to the above adding bodies to protocols,
>>>> extensions could be allowed to add method declarations without bodies to
>>>> protocols.
>>>>
>>>> The two above future work proposals, if both added, would add symmetry
>>>> to where declarations and bodies may appear for protocols.
>>>>
>>>> ## In summary.
>>>>
>>>> The proposal formalises the split use of extensions into their two
>>>> uses: implementing methods and post-hoc adding protocols and methods.
>>>> Syntax is added that clarifies the two use cases, the former are termed
>>>> extensions and must be in the same file as the type is declared, and the
>>>> latter are termed final extensions and can be in any file, however if they
>>>> are not in the type's file the they can only have fileprivate or internal
>>>> access.
>>>>
>>>> Note the distinction between an extension in the same file and in a
>>>> separate file is consistent with the philosophy that there is special
>>>> status to the same file as proposed for private in
>>>> https://github.com/apple/swift-evolution/blob/master/proposals/0169-improve-interaction-between-private-declarations-and-extensions.md
>>>> .
>>>>
>>>> ===================================================
>>>>
>>>> #Proposal: Split extension usage up into implementing methods and
>>>> adding methods and protocols post-hoc
>>>>
>>>> Draft 2 (Added support for post-hoc conformance to a protocol -
>>>> replaced static final extensions with final extensions)
>>>>
>>>> ## Introduction
>>>>
>>>> Currently extension methods are confusing because they have different
>>>> dispatch rules for the same calling syntax. EG:
>>>>
>>>> public protocol P {
>>>> func mP() -> String
>>>> }
>>>> extension P {
>>>> func mP() -> String { return "P.mP" }
>>>> func mE() -> String { return "P.mE" }
>>>> }
>>>> struct S: P {
>>>> func mP() -> String { return "S.mP" }
>>>> func mE() -> String { return "S.mE" }
>>>> }
>>>> let s = S()
>>>> s.mP() // S.mP as expected
>>>> s.mE() // S.mE as expected
>>>> let p: P = s // Note: s now typed as P
>>>> p.mP() // S.mP as expected
>>>> p.mE() // P.mE unexpected!
>>>>
>>>> Extension methods can also cause compatibility problems between
>>>> modules, consider:
>>>>
>>>> In Module A
>>>> extension Int: P {
>>>> func m() -> String { print("A.m") }
>>>> }
>>>>
>>>> In Module B
>>>> extension Int: P {
>>>> func m() -> String { print("B.m") }
>>>> }
>>>>
>>>> In Module C
>>>> import A
>>>> import B // Should this be an error
>>>> let i = 0
>>>> i.m() // Should it return A.m or B.m?
>>>>
>>>> This proposal cures the above two problems by separating extension
>>>> methods into two seperate use cases: implementations for methods and adding
>>>> methods and protocols post-hoc.
>>>>
>>>> ## Implementing methods
>>>>
>>>> If the extension is in the same file as the protocol/struct/class
>>>> declaration then it implements the methods and is dispatched using a
>>>> Vtable. EG:
>>>>
>>>> File P.swift
>>>> protocol/struct/class P {
>>>> // func m() not declared in type since it is added by the
>>>> extension, under this proposal it is an error to include a declaration in a
>>>> type *and* in an extension
>>>> }
>>>> extension P {
>>>> func m() { print("P.m") } // m is added to the
>>>> protocol/struct/class declaration
>>>> }
>>>>
>>>> Same or other file
>>>> struct S: P {
>>>> override func m() { print("S.m") } // Note override required
>>>> because m already has an implementation from the extension
>>>> }
>>>> let p: P = S() // Note typed as P
>>>> p.m() // Now prints S.m as expected
>>>>
>>>> Extensions in the same file as the declaration can have any access, can
>>>> be final, and can have where clauses and provide inheritable
>>>> implementations.
>>>>
>>>> In a protocol at present there is a difference in behaviour between a
>>>> protocol that declares a method that is then implemented in an extension
>>>> and a protocol that just has the method implemented in an extension and no
>>>> declaration. This situation only applies to protocols, for structs and
>>>> classes you cannot declare in type and implement in extensions. The
>>>> proposal unifies the behaviour of protocol/struct/class with extensions and
>>>> prevents the error of a minor typo between the protocol and extension
>>>> adding two methods instead of generating an error.
>>>>
>>>> The implementation needed to achieve this is that a value instance
>>>> typed as a protocol is copied onto the heap, a pointer to its Vtable added,
>>>> and it is passed as a pointer. IE it becomes a class instance. No change
>>>> needed for a class instance typed as a protocol.
>>>>
>>>> ## Post-hoc adding protocols and methods
>>>>
>>>> A new type of extension is proposed, a "final extension", which can be
>>>> either in or outside the file in which the protocol/struct/class
>>>> declaration is in. EG:
>>>>
>>>> protocol P2 {
>>>> func m2P()
>>>> }
>>>> final extension S: P2 { // Note extension marked final
>>>> func m2P() { print("SP2.m2P") } // Implicitly final, completely
>>>> implements P2
>>>> func m2E() { print("SP2.m2E") } // Implicitly final, not an
>>>> existing method
>>>> }
>>>>
>>>> Which are called as any other method would be called:
>>>>
>>>> let s = S()
>>>> s.m2P() // Prints SP2.m2P
>>>> s.m2E() // Prints SP2.m2E
>>>>
>>>> A method added by a final extension is is implicitly final, as the name
>>>> would suggest, and cannot be overridden.
>>>>
>>>> If the final extension:
>>>>
>>>> 1. Adds a method, e.g. m2E, that method cannot already exist. IE a
>>>> final extension cannot override an existing method or implement a protocol
>>>> declared method that lacks an implementation unless it also post-hoc adds
>>>> the protocol.
>>>>
>>>> 2. Adds a protocol then it must implement all the methods in that
>>>> protocol that are not currently implemented.
>>>>
>>>> 3. Is outside of the file in which the protocol/struct/class
>>>> declaration is in then the extension and the methods can only have
>>>> fileprivate or internal access. This prevents post-hoc extensions from
>>>> numerous modules clashing, since they are not exported outside of the
>>>> module.
>>>>
>>>> ## Possible future work (not part of this proposal)
>>>>
>>>> This proposal will naturally allow bodies to be added to protocols
>>>> directly rather than via an extension, since under the proposal the
>>>> extension adds the declaration to the type so it is a small step to allow
>>>> the protocol methods to have an implementation.
>>>>
>>>> In an opposite sense to the above adding bodies to protocols,
>>>> extensions could be allowed to add method declarations without bodies to
>>>> protocols.
>>>>
>>>> The two above future work proposals, if both added, would add symmetry
>>>> to where declarations and bodies may appear for protocols.
>>>>
>>>> ## In summary.
>>>>
>>>> The proposal formalises the split use of extensions into their two
>>>> uses: implementing methods and post-hoc adding protocols and methods.
>>>> Syntax is added that clarifies the two use cases, the former are termed
>>>> extensions and must be in the same file as the type is declared, and the
>>>> latter are termed final extensions and can be in any file, however if they
>>>> are not in the type's file the they can only have fileprivate or internal
>>>> access.
>>>>
>>>> Note the distinction between an extension in the same file and in a
>>>> separate file is consistent with the philosophy that there is special
>>>> status to the same file as proposed for private in
>>>> https://github.com/apple/swift-evolution/blob/master/proposals/0169-improve-interaction-between-private-declarations-and-extensions.md
>>>> .
>>>>
>>>>
>>>> ====================================
>>>>
>>>> On 14 Apr 2017, at 8:17 am, Brent Royal-Gordon <brent at architechies.com>
>>>> wrote:
>>>>
>>>> On Apr 13, 2017, at 3:10 PM, Howard Lovatt via swift-evolution <
>>>> swift-evolution at swift.org> wrote:
>>>>
>>>>
>>>> I don't see that retroactive conformance needs to be exportable. If it
>>>> is exported then you cannot prevent clashes from two modules, this is a
>>>> known problem in C#. Because of this and other problems with C# extensions,
>>>> this style of extension were rejected by other language communities
>>>> (notably Java and Scala).
>>>>
>>>>
>>>> A better alternative for export is a new class that encapsulates the
>>>> standard type but with added methods for the protocol to be added. This way
>>>> there is no clash between modules. EG:
>>>>
>>>>
>>>> public protocol P {
>>>>
>>>> func m() -> String
>>>>
>>>> }
>>>>
>>>> public class PInt: P {
>>>>
>>>> var value = 0
>>>>
>>>> func m() -> String { return "PI.m" }
>>>>
>>>> }
>>>>
>>>>
>>>> Howard, this would be very source-breaking and would fail to achieve
>>>> fundamental goals of Swift's protocol design. Removing retroactive
>>>> conformance is no more realistic than removing Objective-C bridging—another
>>>> feature which introduces various ugly edge cases and tricky behaviors but
>>>> is also non-negotiable.
>>>>
>>>> --
>>>> Brent Royal-Gordon
>>>> Architechies
>>>>
>>>> _______________________________________________
>> swift-evolution mailing list
>> swift-evolution at swift.org
>> https://lists.swift.org/mailman/listinfo/swift-evolution
>>
>> --
> -- Howard.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.swift.org/pipermail/swift-evolution/attachments/20170502/d1ebd928/attachment.html>
More information about the swift-evolution
mailing list