[swift-evolution] [Manifesto] Completing Generics

Austin Zheng austinzheng at gmail.com
Sun May 8 17:38:37 CDT 2016


Is the plan to eventually support "multiple" forms of concrete same-type
requirement syntax - the existing "where Element == SomeConcreteType" and
the generic parameterized extensions described elsewhere? If not, the
syntax should probably be discussed as part of a pre-proposal thread before
anything else happens.

Also, I think it would be valuable to add "covariant and contravariant
generic parameters" to the "unlikely" list (there's now a copy in the docs/
directory), as those have come up several times in the past and the core
team has expressed that they are pretty dead set against that feature.

Best,
Austin

On Sun, May 8, 2016 at 2:37 PM, David Hart via swift-evolution <
swift-evolution at swift.org> wrote:

> Sorry, I misunderstood that you meant that the version of Concrete
> same-type requirement that does not introduce new syntax could be sent
> through as a bug request. It’s now done:
>
> [SR-1447] Concrete same-type requirements
> <https://bugs.swift.org/browse/SR-1447>
>
> On 08 May 2016, at 23:17, David Hart via swift-evolution <
> swift-evolution at swift.org> wrote:
>
> I created two bug requests for Recursive protocol constraints and Nested
> generics and will write a proposal for Concrete same-type requirements.
>
> [SR-1445] Recursive protocol constraints
> <https://bugs.swift.org/browse/SR-1445>
>
> [SR-1446] Nested generics <https://bugs.swift.org/browse/SR-1446>
>
> On 03 May 2016, at 09:58, Douglas Gregor <dgregor at apple.com> wrote:
>
>
>
> Sent from my iPhone
>
> On May 2, 2016, at 3:58 PM, David Hart <david at hartbit.com> wrote:
>
> I’d like to continue moving Completing Generics forward for Swift 3 with
> proposals. Can Douglas, or someone from the core team, tell me if the
> topics mentioned in *Removing unnecessary restrictions* require proposals
> or if bug reports should be opened for them instead?
>
>
> I'd classify everything in that section as a bug, so long as we're
> restricting ourselves to the syntax already present in the language.
> Syntactic improvements (e.g., for same-type-to-concrete constraints) would
> require a proposal.
>
>   - Doug
>
>
>
> On 03 Mar 2016, at 02:22, Douglas Gregor via swift-evolution <
> swift-evolution at swift.org> wrote:
>
> Hi all,
>
> *Introduction*
>
> The “Complete Generics” goal for Swift 3 has been fairly ill-defined thus
> fair, with just this short blurb in the list of goals:
>
>
>    - *Complete generics*: Generics are used pervasively in a number of
>    Swift libraries, especially the standard library. However, there are a
>    number of generics features the standard library requires to fully realize
>    its vision, including recursive protocol constraints, the ability to make a
>    constrained extension conform to a new protocol (i.e., an array of
>    Equatable elements is Equatable), and so on. Swift 3.0 should provide
>    those generics features needed by the standard library, because they affect
>    the standard library's ABI.
>
> This message expands upon the notion of “completing generics”. It is not a
> plan for Swift 3, nor an official core team communication, but it collects
> the results of numerous discussions among the core team and Swift
> developers, both of the compiler and the standard library. I hope to
> achieve several things:
>
>
>    - Communicate a vision for Swift generics, building on the original
>    generics design document
>    <https://github.com/apple/swift/blob/master/docs/Generics.rst>, so we
>    have something concrete and comprehensive to discuss.
>    - Establish some terminology that the Swift developers have been using
>    for these features, so our discussions can be more productive (“oh, you’re
>    proposing what we refer to as ‘conditional conformances’; go look over at
>    this thread”).
>    - Engage more of the community in discussions of specific generics
>    features, so we can coalesce around designs for public review. And maybe
>    even get some of them implemented.
>
>
> A message like this can easily turn into a centithread
> <http://www.urbandictionary.com/define.php?term=centithread>. To separate
> concerns in our discussion, I ask that replies to this specific thread be
> limited to discussions of the vision as a whole: how the pieces fit
> together, what pieces are missing, whether this is the right long-term
> vision for Swift, and so on. For discussions of specific language features,
> e.g., to work out the syntax and semantics of conditional conformances or
> discuss the implementation in compiler or use in the standard library,
> please start a new thread based on the feature names I’m using.
>
> This message covers a lot of ground; I’ve attempted a rough categorization
> of the various features, and kept the descriptions brief to limit the
> overall length. Most of these aren’t my ideas, and any syntax I’m providing
> is simply a way to express these ideas in code and is subject to change.
> Not all of these features will happen, either soon or ever, but they are
> intended to be a fairly complete whole that should mesh together. I’ve put
> a * next to features that I think are important in the nearer term vs.
> being interesting “some day”. Mostly, the *’s reflect features that will
> have a significant impact on the Swift standard library’s design and
> implementation.
>
> Enough with the disclaimers; it’s time to talk features.
>
> *Removing unnecessary restrictions*
>
> There are a number of restrictions to the use of generics that fall out of
> the implementation in the Swift compiler. Removal of these restrictions is
> a matter of implementation only; one need not introduce new syntax or
> semantics to realize them. I’m listing them for two reasons: first, it’s an
> acknowledgment that these features are intended to exist in the model we
> have today, and, second, we’d love help with the implementation of these
> features.
>
>
> **Recursive protocol constraints*
>
> Currently, an associated type cannot be required to conform to its
> enclosing protocol (or any protocol that inherits that protocol). For
> example, in the standard library SubSequence type of a Sequence should
> itself be a Sequence:
>
> protocol Sequence {
>   associatedtype Iterator : IteratorProtocol
>>   associatedtype SubSequence *: Sequence   **// currently ill-formed, but
> should be possible*
> }
>
>
> The compiler currently rejects this protocol, which is unfortunate: it
> effectively pushes the SubSequence-must-be-a-Sequence requirement into
> every consumer of SubSequence, and does not communicate the intent of this
> abstraction well.
>
> *Nested generics*
>
> Currently, a generic type cannot be nested within another generic type,
> e.g.
>
> struct X<T> {
>   struct Y<U> { }  *// currently ill-formed, but should be possible*
> }
>
>
> There isn’t much to say about this: the compiler simply needs to be
> improved to handle nested generics throughout.
>
>
> *Concrete same-type requirements*
>
> Currently, a constrained extension cannot use a same-type constraint to
> make a type parameter equivalent to a concrete type. For example:
>
> extension Array *where Element == String* {
>   func makeSentence() -> String {
>     // uppercase first string, concatenate with spaces, add a period,
> whatever
>   }
> }
>
>
> This is a highly-requested feature that fits into the existing syntax and
> semantics. Note that one could imagine introducing new syntax, e.g.,
> extending “Array<String>”, which gets into new-feature territory: see the
> section on “Parameterized extensions”.
>
> *Parameterizing other declarations*
>
> There are a number of Swift declarations that currently cannot have
> generic parameters; some of those have fairly natural extensions to generic
> forms that maintain their current syntax and semantics, but become more
> powerful when made generic.
>
>
> *Generic typealiases*
> Typealiases could be allowed to carry generic parameters. They would still
> be aliases (i.e., they would not introduce new types). For example:
>
> typealias StringDictionary<Value> = Dictionary<String, Value>
>
> var d1 = StringDictionary<Int>()
> var d2: Dictionary<String, Int> = d1 // okay: d1 and d2 have the same
> type, Dictionary<String, Int>
>
>
>
> *Generic subscripts*
>
> Subscripts could be allowed to have generic parameters. For example, we
> could introduce a generic subscript on a Collection that allows us to pull
> out the values at an arbitrary set of indices:
>
> extension Collection {
>   subscript*<Indices: Sequence where Indices.Iterator.Element == Index>*(indices:
> Indices) -> [Iterator.Element] {
>     get {
>       var result = [Iterator.Element]()
>       for index in indices {
>         result.append(self[index])
>       }
>
>       return result
>     }
>
>     set {
>       for (index, value) in zip(indices, newValue) {
>         self[index] = value
>       }
>     }
>   }
> }
>
>
>
> *Generic constants*
>
> let constants could be allowed to have generic parameters, such that they
> produce differently-typed values depending on how they are used. For
> example, this is particularly useful for named literal values, e.g.,
>
> let π<T : FloatLiteralConvertible>: T
> = 3.141592653589793238462643383279502884197169399
>
>
> The Clang importer could make particularly good use of this when importing
> macros.
>
>
> *Parameterized extensions*
>
> Extensions themselves could be parameterized, which would allow some
> structural pattern matching on types. For example, this would permit one to
> extend an array of optional values, e.g.,
>
> extension*<T>* Array *where Element == T?* {
>   var someValues: [T] {
>     var result = [T]()
>     for opt in self {
>       if let value = opt { result.append(value) }
>     }
>    return result
>   }
> }
>
>
> We can generalize this to a protocol extensions:
>
> extension*<T>* Sequence *where Element == T?* {
>   var someValues: [T] {
>     var result = [T]()
>     for opt in self {
>       if let value = opt { result.append(value) }
>     }
>    return result
>   }
> }
>
>
> Note that when one is extending nominal types, we could simplify the
> syntax somewhat to make the same-type constraint implicit in the syntax:
>
> extension*<T>* Array*<T?>* {
>   var someValues: [T] {
>     var result = [T]()
>     for opt in self {
>       if let value = opt { result.append(value) }
>     }
>    return result
>   }
> }
>
>
> When we’re working with concrete types, we can use that syntax to improve
> the extension of concrete versions of generic types (per “Concrete
> same-type requirements”, above), e.g.,
>
> extension Array*<String>* {
>   func makeSentence() -> String {
>     // uppercase first string, concatenate with spaces, add a period,
> whatever
>   }
> }
>
>
> *Minor extensions*
>
> There are a number of minor extensions we can make to the generics system
> that don’t fundamentally change what one can express in Swift, but which
> can improve its expressivity.
>
>
> **Arbitrary requirements in protocols*
>
> Currently, a new protocol can inherit from other protocols, introduce new
> associated types, and add new conformance constraints to associated types
> (by redeclaring an associated type from an inherited protocol). However,
> one cannot express more general constraints. Building on the example from
> “Recursive protocol constraints”, we really want the element type of a
> Sequence’s SubSequence to be the same as the element type of the Sequence,
> e.g.,
>
> protocol Sequence {
>   associatedtype Iterator : IteratorProtocol
>>   associatedtype SubSequence : Sequence* where
> SubSequence.Iterator.Element == Iterator.Element*
> }
>
>
> Hanging the where clause off the associated type is protocol not ideal,
> but that’s a discussion for another thread.
>
>
>
> **Typealiases in protocols and protocol extensions*
>
> Now that associated types have their own keyword (thanks!), it’s
> reasonable to bring back “typealias”. Again with the Sequence protocol:
>
> protocol Sequence {
>   associatedtype Iterator : IteratorProtocol
>   typealias Element = Iterator.Element   // rejoice! now we can refer to
> SomeSequence.Element rather than SomeSequence.Iterator.Element
> }
>
>
>
> *Default generic arguments *
>
> Generic parameters could be given the ability to provide default
> arguments, which would be used in cases where the type argument is not
> specified and type inference could not determine the type argument. For
> example:
>
> public final class Promise<Value, Reason=Error> { … }
>
> func getRandomPromise() -> Promise<Int, ErrorProtocol> { … }
>
> var p1: Promise<Int> = …
> var p2: Promise<Int, Error> = p1     *// okay: p1 and p2 have the same
> type Promise<Int, Error>*
> var p3: Promise = getRandomPromise() *// p3 has type **Promise<Int,
> ErrorProtocol> due to type inference*
>
>
>
> *Generalized “class” constraints*
>
> The “class” constraint can currently only be used for defining protocols.
> We could generalize it to associated type and type parameter declarations,
> e.g.,
>
> protocol P {
>   associatedtype A : class
> }
>
> func foo<T : class>(t: T) { }
>
>
> As part of this, the magical AnyObject protocol could be replaced with an
> existential with a class bound, so that it becomes a typealias:
>
> typealias AnyObject = protocol<class>
>
>
> See the “Existentials” section, particularly “Generalized existentials”,
> for more information.
>
>
> **Allowing subclasses to override requirements satisfied by defaults*
>
> When a superclass conforms to a protocol and has one of the protocol’s
> requirements satisfied by a member of a protocol extension, that member
> currently cannot be overridden by a subclass. For example:
>
> protocol P {
>   func foo()
> }
>
> extension P {
>   func foo() { print(“P”) }
> }
>
> class C : P {
>   // gets the protocol extension’s
> }
>
> class D : C {
>   /*override not allowed!*/ func foo() { print(“D”) }
> }
>
> let p: P = D()
> p.foo() // gotcha: prints “P” rather than “D”!
>
>
> D.foo should be required to specify “override” and should be called
> dynamically.
>
>
> *Major extensions to the generics model*
>
> Unlike the minor extensions, major extensions to the generics model
> provide more expressivity in the Swift generics system and, generally, have
> a much more significant design and implementation cost.
>
>
>
> **Conditional conformances*
>
> Conditional conformances express the notion that a generic type will
> conform to a particular protocol only under certain circumstances. For
> example, Array is Equatable only when its elements are Equatable:
>
> extension Array *: Equatable where Element : Equatable* { }
>
> func ==<T : Equatable>(lhs: Array<T>, rhs: Array<T>) -> Bool { … }
>
>
> Conditional conformances are a potentially very powerful feature. One
> important aspect of this feature is how deal with or avoid overlapping
> conformances. For example, imagine an adaptor over a Sequence that has
> conditional conformances to Collection and MutableCollection:
>
> struct SequenceAdaptor<S: Sequence> : Sequence { }
> extension SequenceAdaptor : Collection where S: Collection { … }
> extension SequenceAdaptor : MutableCollection where S: MutableCollection {
> }
>
>
> This should almost certainly be permitted, but we need to cope with or
> reject “overlapping” conformances:
>
> extension SequenceAdaptor : Collection where S:
> SomeOtherProtocolSimilarToCollection { } *// trouble: two ways for
> SequenceAdaptor to conform to Collection*
>
>
> See the section on “Private conformances” for more about the issues with
> having the same type conform to the same protocol multiple times.
>
>
> *Variadic generics*
>
> Currently, a generic parameter list contains a fixed number of generic
> parameters. If one has a type that could generalize to any number of
> generic parameters, the only real way to deal with it today involves
> creating a set of types. For example, consider the standard library’s “zip”
> function. It returns one of these when provided with two arguments to zip
> together:
>
> public struct Zip2Sequence<Sequence1 : Sequence,
>                            Sequence2 : Sequence> : Sequence { … }
>
> public func zip<Sequence1 : Sequence, Sequence2 : Sequence>(
>               sequence1: Sequence1, _ sequence2: Sequence2)
>             -> Zip2Sequence<Sequence1, Sequence2> { … }
>
>
> Supporting three arguments would require copy-paste of those of those:
>
> public struct Zip3Sequence<Sequence1 : Sequence,
>                            Sequence2 : Sequence,
>                            Sequence3 : Sequence> : Sequence { … }
>
> public func zip<Sequence1 : Sequence, Sequence2 : Sequence, Sequence3 :
> Sequence>(
>               sequence1: Sequence1, _ sequence2: Sequence2, _ sequence3:
> sequence3)
>             -> Zip3Sequence<Sequence1, Sequence2, Sequence3> { … }
>
>
> Variadic generics would allow us to abstract over a set of generic
> parameters. The syntax below is hopelessly influenced by C++11 variadic
> templates <http://www.jot.fm/issues/issue_2008_02/article2/> (sorry),
> where putting an ellipsis (“…”) to the left of a declaration makes it a
> “parameter pack” containing zero or more parameters and putting an ellipsis
> to the right of a type/expression/etc. expands the parameter packs within
> that type/expression into separate arguments. The important part is that we
> be able to meaningfully abstract over zero or more generic parameters, e.g.:
>
> public struct ZipIterator<... *Iterators* : IteratorProtocol> : Iterator
> {  *// zero or more type parameters, each of which conforms to
> IteratorProtocol*
>   public typealias Element = (*Iterators.Element...*)
>   *// a tuple containing the element types of each iterator in Iterators*
>
>   var (*...iterators*): (*Iterators...*)    *// zero or more stored
> properties, one for each type in Iterators*
>   var reachedEnd: Bool = false
>
>
>   public mutating func next() -> Element? {
>
>     if reachedEnd { return nil }
>
>
>     guard let values = (*iterators.next()...*) {   *// call “next” on
> each of the iterators, put the results into a tuple named “values"*
>
>       reachedEnd = true
>
>       return nil
>
>     }
>
>
>     return values
>
>   }
> }
>
> public struct ZipSequence<*...Sequences* : Sequence> : Sequence {
>   public typealias Iterator = ZipIterator<*Sequences.Iterator...*>   *//
> get the zip iterator with the iterator types of our Sequences*
>
>   var (...*sequences*): (*Sequences**...*)    *// zero or more stored
> properties, one for each type in Sequences*
>
>   *// details ...*
> }
>
> Such a design could also work for function parameters, so we can pack
> together multiple function arguments with different types, e.g.,
>
> public func zip<*... Sequences : SequenceType*>(*... sequences:
> Sequences...*)
>             -> ZipSequence<*Sequences...*> {
>   return ZipSequence(*sequences...*)
> }
>
>
> Finally, this could tie into the discussions about a tuple “splat”
> operator. For example:
>
> func apply<... Args, Result>(fn: (Args...) -> Result,    *// function
> taking some number of arguments and producing Result*
>                            args: (Args...)) -> Result {  *// tuple of
> arguments*
>   return fn(*args...*)                                     // expand the
> arguments in the tuple “args” into separate arguments
> }
>
>
>
> *Extensions of structural types*
>
> Currently, only nominal types (classes, structs, enums, protocols) can be
> extended. One could imagine extending structural types—particularly tuple
> types—to allow them to, e.g., conform to protocols. For example, pulling
> together variadic generics, parameterized extensions, and conditional
> conformances, one could express “a tuple type is Equatable if all of its
> element types are Equatable”:
>
> extension<...Elements : Equatable> *(Elements...)* : Equatable {   *//
> extending the tuple type “(Elements…)” to be Equatable*
> }
>
>
> There are some natural bounds here: one would need to have actual
> structural types. One would not be able to extend every type:
>
> extension<T> T { *// error: neither a structural nor a nominal type*
> }
>
>
> And before you think you’re cleverly making it possible to have a
> conditional conformance that makes every type T that conforms to protocol P
> also conform to protocol Q, see the section "Conditional conformances via
> protocol extensions”, below:
>
> extension<T : P> T : Q { *// error: neither a structural nor a nominal
> type*
> }
>
>
>
> *Syntactic improvements*
>
> There are a number of potential improvements we could make to the generics
> syntax. Such a list could go on for a very long time, so I’ll only
> highlight some obvious ones that have been discussed by the Swift
> developers.
>
> **Default implementations in protocols*
>
> Currently, protocol members can never have implementations. We could allow
> one to provide such implementations to be used as the default if a
> conforming type does not supply an implementation, e.g.,
>
> protocol Bag {
>   associatedtype Element : Equatable
>   func contains(element: Element) -> Bool
>
>   func containsAll<S: Sequence where Sequence.Iterator.Element ==
> Element>(elements: S) -> Bool {
>     for x in elements {
>       if contains(x) { return true }
>     }
>     return false
>   }
> }
>
> struct IntBag : Bag {
>   typealias Element = Int
>   func contains(element: Int) -> Bool { ... }
>
>   // okay: containsAll requirement is satisfied by Bag’s default
> implementation
> }
>
> One can get this effect with protocol extensions today, hence the
> classification of this feature as a (mostly) syntactic improvement:
>
> protocol Bag {
>   associatedtype Element : Equatable
>   func contains(element: Element) -> Bool
>
>   func containsAll<S: Sequence where Sequence.Iterator.Element ==
> Element>(elements: S) -> Bool
> }
>
> extension Bag {
>   func containsAll<S: Sequence where Sequence.Iterator.Element ==
> Element>(elements: S) -> Bool {
>     for x in elements {
>       if contains(x) { return true }
>     }
>     return false
>   }
> }
>
>
>
>
> **Moving the where clause outside of the angle brackets*
>
> The “where” clause of generic functions comes very early in the
> declaration, although it is generally of much less concern to the client
> than the function parameters and result type that follow it. This is one of
> the things that contributes to “angle bracket blindness”. For example,
> consider the containsAll signature above:
>
> func containsAll<S: Sequence where Sequence.Iterator.Element ==
> Element>(elements: S) -> Bool
>
>
> One could move the “where” clause to the end of the signature, so that the
> most important parts—name, generic parameter, parameters, result
> type—precede it:
>
> func containsAll<S: Sequence>(elements: S) -> Bool
>
>        where Sequence.Iterator.Element == Element
>
>
>
> **Renaming “protocol<…>” to “Any<…>”.*
>
> The “protocol<…>” syntax is a bit of an oddity in Swift. It is used to
> compose protocols together, mostly to create values of existential type,
> e.g.,
>
> var x: protocol<NSCoding, NSCopying>
>
>
> It’s weird that it’s a type name that starts with a lowercase letter, and
> most Swift developers probably never deal with this feature unless they
> happen to look at the definition of Any:
>
> typealias Any = protocol<>
>
>
> “Any” might be a better name for this functionality. “Any” without
> brackets could be a keyword for “any type”, and “Any” followed by brackets
> could take the role of “protocol<>” today:
>
> var x: Any<NSCoding, NSCopying>
>
>
> That reads much better: “Any type that conforms to NSCoding and
> NSCopying”. See the section "Generalized existentials” for additional
> features in this space.
>
> *Maybe*
>
> There are a number of features that get discussed from time-to-time, while
> they could fit into Swift’s generics system, it’s not clear that they
> belong in Swift at all. The important question for any feature in this
> category is not “can it be done” or “are there cool things we can express”,
> but “how can everyday Swift developers benefit from the addition of such a
> feature?”. Without strong motivating examples, none of these “maybes” will
> move further along.
>
> *Dynamic dispatch for members of protocol extensions*
>
> Only the requirements of protocols currently use dynamic dispatch, which
> can lead to surprises:
>
> protocol P {
>   func foo()
> }
>
> extension P {
>   func foo() { print(“P.foo()”)
>   func bar() { print(“P.bar()”)
> }
>
> struct X : P {
>   func foo() { print(“X.foo()”)
>   func bar() { print(“X.bar()”)
> }
>
> let x = X()
> x.foo() // X.foo()
> x.bar() // X.bar()
>
> let p: P = X()
> p.foo() // X.foo()
> p.bar() // P.bar()
>
>
> Swift could adopt a model where members of protocol extensions are
> dynamically dispatched.
>
>
> *Named generic parameters*
>
> When specifying generic arguments for a generic type, the arguments are
> always positional: Dictionary<String, Int> is a Dictionary whose Key type
> is String and whose Value type is Int, by convention. One could permit the
> arguments to be labeled, e.g.,
>
> var d: Dictionary<*Key:* String, *Value:* Int>
>
>
> Such a feature makes more sense if Swift gains default generic arguments,
> because generic argument labels would allow one to skip defaulted arguments.
>
>
> *Generic value parameters*
>
> Currently, Swift’s generic parameters are always types. One could imagine
> allowing generic parameters that are values, e.g.,
>
> struct MultiArray<T,* let Dimensions: Int*> { *// specify the number of
> dimensions to the array*
>   subscript (indices: Int...) -> T {
>     get {
>       require(indices.count == *Dimensions*)
>       // ...
>     }
> }
>
>
> A suitably general feature might allow us to express fixed-length array or
> vector types as a standard library component, and perhaps also allow one to
> implement a useful dimensional analysis library. Tackling this feature
> potentially means determining what it is for an expression to be a
> “constant expression” and diving into dependent-typing, hence the “maybe”.
>
>
> *Higher-kinded types*
>
> Higher-kinded types allow one to express the relationship between two
> different specializations of the same nominal type within a protocol. For
> example, if we think of the Self type in a protocol as really being
> “Self<T>”, it allows us to talk about the relationship between “Self<T>”
> and “Self<U>” for some other type U. For example, it could allow the “map”
> operation on a collection to return a collection of the same kind but with
> a different operation, e.g.,
>
> let intArray: Array<Int> = …
> intArray.map { String($0) } *// produces Array<String>*
> let intSet: Set<Int> = …
> intSet.map { String($0) }   *// produces Set<String>*
>
>
>
> Potential syntax borrowed from one thread on higher-kinded types
> <https://lists.swift.org/pipermail/swift-evolution/Week-of-Mon-20151214/002736.html> uses
> ~= as a “similarity” constraint to describe a Functor protocol:
>
> protocol Functor {
>   associatedtype A
>   func fmap<FB where *FB ~= Self*>(f: A -> FB.A) -> FB
> }
>
>
>
> *Specifying type arguments for uses of generic functions*
>
> The type arguments of a generic function are always determined via type
> inference. For example, given:
>
> func f<T>(t: T)
>
>
> one cannot directly specify T: either one calls “f” (and T is determined
> via the argument’s type) or one uses “f” in a context where it is given a
> particular function type (e.g., “let x: (Int) -> Void = f”  would infer T =
> Int). We could permit explicit specialization here, e.g.,
>
> let x = f<Int> // x has type (Int) -> Void
>
>
>
> *Unlikely*
>
> Features in this category have been requested at various times, but they
> don’t fit well with Swift’s generics system because they cause some part of
> the model to become overly complicated, have unacceptable implementation
> limitations, or overlap significantly with existing features.
>
> *Generic protocols*
>
> One of the most commonly requested features is the ability to parameterize
> protocols themselves. For example, a protocol that indicates that the Self
> type can be constructed from some specified type T:
>
> protocol ConstructibleFromValue*<T>* {
>   init(_ value: T)
> }
>
>
> Implicit in this feature is the ability for a given type to conform to the
> protocol in two different ways. A “Real” type might be constructible from
> both Float and Double, e.g.,
>
> struct Real { … }
> extension Real : ConstructibleFrom<Float> {
>   init(_ value: Float) { … }
> }
> extension Real : ConstructibleFrom<Double> {
>   init(_ value: Double) { … }
> }
>
>
> Most of the requests for this feature actually want a different feature.
> They tend to use a parameterized Sequence as an example, e.g.,
>
> protocol Sequence<Element> { … }
>
> func foo(strings: Sequence<String>) {  /// works on any sequence
> containing Strings
>   // ...
> }
>
>
> The actual requested feature here  is the ability to say “Any type that
> conforms to Sequence whose Element type is String”, which is covered by the
> section on “Generalized existentials”, below.
>
> More importantly, modeling Sequence with generic parameters rather than
> associated types is tantalizing but wrong: you don’t want a type conforming
> to Sequence in multiple ways, or (among other things) your for..in loops
> stop working, and you lose the ability to dynamically cast down to an
> existential “Sequence” without binding the Element type (again, see
> “Generalized existentials”). Use cases similar to the
> ConstructibleFromValue protocol above seem too few to justify the potential
> for confusion between associated types and generic parameters of protocols;
> we’re better off not having the latter.
>
>
> *Private conformances *
>
> Right now, a protocol conformance can be no less visible than the minimum
> of the conforming type’s access and the protocol’s access. Therefore, a
> public type conforming to a public protocol must provide the conformance
> publicly. One could imagine removing that restriction, so that one could
> introduce a private conformance:
>
> public protocol P { }
> public struct X { }
> extension X : *internal P* { … } // X conforms to P, but only within this
> module
>
>
> The main problem with private conformances is the interaction with dynamic
> casting. If I have this code:
>
> func foo(value: Any) {
>   if let x = value as? P { print(“P”) }
> }
>
> foo(X())
>
>
> Under what circumstances should it print “P”? If foo() is defined within
> the same module as the conformance of X to P? If the call is defined within
> the same module as the conformance of X to P? Never? Either of the first
> two answers requires significant complications in the dynamic casting
> infrastructure to take into account the module in which a particular
> dynamic cast occurred (the first option) or where an existential was formed
> (the second option), while the third answer breaks the link between the
> static and dynamic type systems—none of which is an acceptable result.
>
>
> *Conditional conformances via protocol extensions*
>
> We often get requests to make a protocol conform to another protocol. This
> is, effectively, the expansion of the notion of “Conditional conformances”
> to protocol extensions. For example:
>
> protocol P {
>   func foo()
> }
>
> protocol Q {
>   func bar()
> }
>
> extension *Q : P* { *// every type that conforms to Q also conforms to P*
>   func foo() {    *// implement “foo” requirement in terms of “bar"*
>     bar()
>   }
> }
>
> func f<T: P>(t: T) { … }
>
> struct X : Q {
>   func bar() { … }
> }
>
> f(X()) // okay: X conforms to P through the conformance of Q to P
>
>
> This is an extremely powerful feature: is allows one to map the
> abstractions of one domain into another domain (e.g., every Matrix is a
> Graph). However, similar to private conformances, it puts a major burden on
> the dynamic-casting runtime to chase down arbitrarily long and potentially
> cyclic chains of conformances, which makes efficient implementation nearly
> impossible.
>
> *Potential removals*
>
> The generics system doesn’t seem like a good candidate for a reduction in
> scope; most of its features do get used fairly pervasively in the standard
> library, and few feel overly anachronistic. However...
>
> *Associated type inference*
>
> Associated type inference is the process by which we infer the type
> bindings for associated types from other requirements. For example:
>
> protocol IteratorProtocol {
>   associatedtype Element
>   mutating func next() -> Element?
> }
>
> struct IntIterator : IteratorProtocol {
>   mutating func next() -> Int? { … }  // use this to infer Element = Int
> }
>
>
> Associated type inference is a useful feature. It’s used throughout the
> standard library, and it helps keep associated types less visible to types
> that simply want to conform to a protocol. On the other hand, associated
> type inference is the only place in Swift where we have a *global* type
> inference problem: it has historically been a major source of bugs, and
> implementing it fully and correctly requires a drastically different
> architecture to the type checker. Is the value of this feature worth
> keeping global type inference in the Swift language, when we have
> deliberatively avoided global type inference elsewhere in the language?
>
>
> *Existentials*
>
> Existentials aren’t really generics per se, but the two systems are
> closely intertwined due to their mutable dependence on protocols.
>
> **Generalized existentials*
>
> The restrictions on existential types came from an implementation
> limitation, but it is reasonable to allow a value of protocol type even
> when the protocol has Self constraints or associated types. For example,
> consider IteratorProtocol again and how it could be used as an existential:
>
> protocol IteratorProtocol {
>   associatedtype Element
>   mutating func next() -> Element?
> }
>
> let it: IteratorProtocol = …
> it.next()   // if this is permitted, it could return an “Any?”, i.e., the
> existential that wraps the actual element
>
>
> Additionally, it is reasonable to want to constrain the associated types
> of an existential, e.g., “a Sequence whose element type is String” could be
> expressed by putting a where clause into “protocol<…>” or “Any<…>” (per
> “Renaming protocol<…> to Any<…>”):
>
> let strings: Any<Sequence* where .Iterator.Element == String*> = [“a”,
> “b”, “c”]
>
>
> The leading “.” indicates that we’re talking about the dynamic type, i.e.,
> the “Self” type that’s conforming to the Sequence protocol. There’s no
> reason why we cannot support arbitrary “where” clauses within the “Any<…>”.
> This very-general syntax is a bit unwieldy, but common cases can easily be
> wrapped up in a generic typealias (see the section “Generic typealiases”
> above):
>
> typealias AnySequence<Element> = *Any<Sequence where .Iterator.Element ==
> Element>*
> let strings: AnySequence<String> = [“a”, “b”, “c”]
>
>
>
> *Opening existentials*
>
> Generalized existentials as described above will still have trouble with
> protocol requirements that involve Self or associated types in function
> parameters. For example, let’s try to use Equatable as an existential:
>
> protocol Equatable {
>   func ==(lhs: Self, rhs: Self) -> Bool
>   func !=(lhs: Self, rhs: Self) -> Bool
> }
>
> let e1: Equatable = …
> let e2: Equatable = …
> if e1 == e2 { … } *// error:* e1 and e2 don’t necessarily have the same
> dynamic type
>
>
> One explicit way to allow such operations in a type-safe manner is to
> introduce an “open existential” operation of some sort, which extracts and
> gives a name to the dynamic type stored inside an existential. For example:
>
>
>
> if let storedInE1 = e1 openas T {     // T is a the type of storedInE1, a
> copy of the value stored in e1
>
>   if let storedInE2 = e2 as? T {      // is e2 also a T?
>
>     if storedInE1 == storedInE2 { … } // okay: storedInT1 and storedInE2
> are both of type T, which we know is Equatable
>
>   }
>
> }
>
>
> Thoughts?
>
> - Doug
>
> _______________________________________________
> swift-evolution mailing list
> swift-evolution at swift.org
> https://lists.swift.org/mailman/listinfo/swift-evolution
>
>
>
> _______________________________________________
> swift-evolution mailing list
> swift-evolution at swift.org
> https://lists.swift.org/mailman/listinfo/swift-evolution
>
>
>
> _______________________________________________
> swift-evolution mailing list
> swift-evolution at swift.org
> https://lists.swift.org/mailman/listinfo/swift-evolution
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.swift.org/pipermail/swift-evolution/attachments/20160508/f0e1fe66/attachment.html>


More information about the swift-evolution mailing list